Showing posts with label Wheels. Show all posts
Showing posts with label Wheels. Show all posts

Wednesday, September 3, 2014

Unassuming rampant polluters on two wheels: Small mopeds cause more air pollution than cars

They are small, low in consumption and city-friendly but they are by no means ecologically harmless. Mopeds with two-stroke engines are at the top of the list of air polluters in some towns, mainly in Asia, Africa and southern Europe. This despite the fact that they account for only a fraction of total traffic volume. The suspicion that the two-wheelers, that are spared strict emission requirements, are the main contributors to air pollution in many cities has been around for a few years. Now an international research team headed up by the Paul Scherrer Institute has confirmed this suspicion with innovative measurement techniques.

The scientists used a smog chamber developed at PSI to measure the emission of organic aerosols and aromatic hydrocarbons from mopeds in the laboratory and in standard driving cycles. Organic aerosols are small particles which are suspended in air. They account for a major share of fine particles from traffic. By contrast, after being emitted as gaseous substances aromatic hydrocarbons (arenes) can be converted through chemical reactions in the atmosphere in part into secondary organic aerosols and, by extension, into fine particles. In fact, these secondary organic aerosols often account for the main proportion of fine particles. In their original gaseous form some arenes are harmful, too. Benzene, for instance, which is added to petrol is carcinogenic.

The new study shows that during the conversion of exhaust gas from two-stroke mopeds other worrying products are formed. Using chemical analyses the scientists discovered that during the conversion of arenes from moped exhaust gases into aerosols, harmful reactive oxygen species are also formed which can reach the lungs.

High level of emissions even when not moving

Both when standing still and in motion mopeds with two-stroke engines emit amounts of arenes which are several orders of magnitude higher than the limit values admissible in Europe and the USA. According to the study authors, waiting behind a two-stroke moped in traffic may, therefore, constitute a considerable health risk.

The scientists list a number of possible reasons for these elevated emissions. Basically, these are old, well-known problems which are typical for two-stroke engines like incomplete combustion, the high ratio of fuel to air in the fuel mixture or the need to add the lubricating oil directly to the fuel. Problems of this kind only occur to a minor degree if at all with four-stroke engines.

Small fleet with a big impact

The new study shows that the conventional view that cars and trucks account for the lion's share of fine particles pollution from traffic will have to be revised, at least for specific regions. The researchers have calculated that in the Thai capital Bangkok two-stroke mopeds generate as much as 60 percent of emissions of primary organic aerosols. These two-wheelers only account for 10 percent of fuel consumption by traffic in the city. The calculations are based on the average emission factor of the European mopeds examined in the study. Hence, it probably underestimated the actual emissions of the mopeds circulating in Bangkok.

Ban with tangible results

Field measurements in China confirm the image of these rampant polluters on two wheels. In the city of Guangzhou the concentrations of arenes in the air fell by more than 80 percent in 2005 after a ban on two-stroke mopeds. Just 60 kilometres away in the city of Dongguan with its comparatively strict traffic restrictions, higher aromatic concentrations are measured today than in Guangzhou. The study authors report that in southern European towns the concentration of specific air contaminants could be considerably reduced if two-stroke mopeds were gradually withdrawn from circulation. The EU emission standard for two-stroke mopeds (Euro 2), which is also valid in Switzerland, dates back to 2002. For cars there are now far stricter requirements in Euro 5. From 2017 the EU will, therefore, introduce lower emission limits for small mopeds, too. Furthermore, more environmentally compatible alternatives are already available on the market like electrically driven mopeds which don't cause any noise pollution either. Mopeds with four-stroke engines, although not completely harmless, would be better than two-strokers.


View the original article here

Tuesday, July 8, 2014

KTW and the C63 AMG Coupe With Forged Wheels and 500+ HP


The Mercedes-Benz C63 AMG has been a highly regarded performance car amongst not just the automotive press, but with consumers as well since it was first unveiled. It's simple formula of using a big rear-wheel drive V-8 powertrain with luxurious amenities has made it a popular choice for those looking for comfort, style, and performance to back it all up. One German aftermarket tuning company, KTW Tuning, wanted to take the sports car to the next level in terms of performance and style without going over-the-top with upgrades. Instead they stuck to a simple plan of adding new engine upgrades, chassis modifications, forged wheels, and enhanced aerodynamics to create an even more exciting AMG model.

The naturally-aspirated 6.2-liter V-8 engine that Mercedes-Benz builds by hand is still used in the Coupe variant of the C63 AMG model and has been tuned for even more power by the team at KTW. The 6.2-liter already has a thrilling exhaust note but was fitted with a new stainless steel exhaust system to optimize backpressure and produce a thunderous exhaust note. The system utilizes two new racing catalytic converters as well as a sport muffler and weighs 10 lbs less than the factory setup. After the exhaust was installed, the engineers at KTW Tuning focused on developing a new software tune for the sports car's ECU. The ECU software was altered and now features enhanced ignition, timing, spark, and fuel delivery to create even more power. The two modifications result in a total of 525 horsepower being sent to each of the rear forged wheels for quicker acceleration and a higher top speed.

With more power being sent to the factory rim and tire setup, the KTW Tuning team had to upgrade the chassis in order to accommodate. The factory suspension was removed and replaced with a new KW Variant 3 coilover system that helps to sharpen up handling and lowers the ride height by 15 mm for a better center of gravity. The rim and tire setup was removed in place of a new set of monoblock forged wheels with a lower overall weight and a 9.5 x 19 front and 11.0 x 19 rear setup. The wheels were also fitted with Michelin Pilot Sport tires for better traction on pavement.

The final part of the Mercedes-Benz C63 AMG that was upgraded was the exterior. Here, the team focused on subtle additions that would improve high-speed stability. KTW installed a new badgeless grille that improved airflow to the radiator and a new spoiler lip that increased downforce. Two new side skirts were installed that redirect air away from the rear forged wheels. The rear is finished off with a small trunk-mounted spoiler and a diffuser insert with fins that create a suction-effect at high speeds to keep the rear of the sports car planted.




Douglas Cougevan is a contributing writer at COR Wheels. COR Wheels specializes in 3-piece wheels and monoblock forged wheels in a variety of traditional step lip, reverse, and concave designs for sports cars, luxury cars, and SUVs.




Monday, July 7, 2014

The New McChip-DKR Mercedes-Benz C63 AMG With 3 Piece Wheels


Mercedes-Benz may have quite a few performance models in their lineup from their in-house AMG performance division. Everything from their compact B-Class to their SLS AMG GT super car bears the "AMG" name and has impressive performance along with it. One of the most exciting AMG sedans might not even be the most expensive, however. The Mercedes-Benz C63 AMG sedan provides drivers and passengers with a dynamic chassis and intoxicating naturally-aspirated V-8 with a thrilling exhaust note that adds up to a superb overall package. While this is fine for most people, it wasn't for the team at McChip-DKR, the German aftermarket tuning company. The engineers at McChip-DKR wanted to extract even more performance from the German sports sedan so they developed a new conversion program that equipped the car with a supercharger system, new chassis, 3 piece wheels, and a special exterior foil wrap with custom graphics.

Beneath the hood of the Mercedes-Benz C63 AMG by McChip-DKR isn't your average 6.2-liter hand-built V-8 AMG engine. The once naturally-aspirated engine was given a healthy dose of power thanks to a custom-built supercharger system that was designed specifically for the 6.2-liter engine. The supercharger system sits directly atop the engine and is mated to the intake manifold. A new air intake system sucks air into the supercharger where it is compressed and sent into each cylinder. From there, the exhaust is quickly sent out the newly upgraded stainless steel exhaust system with sport catalytic converters with little backpressure for better throttle response. The final touch is a new ECU tune that ensures all of the components work together in harmony. The result is an astonishing 600 horsepower and 750 Nm of torque being sent to each of the rear 3 piece wheels for faster acceleration and top speed.

In order to handle the extra power, much of the chassis had to be modified and reinforced from the suspension to the rims. To start things off a new set of 3 piece wheels were installed with a forged construction to handle the added power being sent to the rear rims. Each wheel was equipped with new Continental high-performance tires to improve grip and handling. Prior to installation, the 3 piece wheels were extended outwards thanks to new spacers at the front and rear axles for a more aggressive stance. The suspension was then modified with a new set of sport springs that lowered the center of gravity to allow for more dynamic handling characteristics.

The final touch on the McChip-DKR Mercedes-Benz C63 AMG model was a new exterior wrap. The German company teamed up with CoverEFX to create an urban-style camouflage foil wrap with McChip-DKR graphics and logos along each side of the sports sedan.




Douglas Cougevan is a contributing writer at COR Wheels. COR Wheels specializes in 3 piece wheels and monoblock rims in a variety of both traditional step lip, reverse, and concave designs.